Rock Ripper Toyo Headers
Trail-Gear has raised the bar yet again in the Toyota Off Road Industry with the newest addition to our product line, a stainless steel header. Our Rock Ripper Toy Header is the best on the market today, it features 100% polished stainless steel 1/16" thick tubes going into a 1/2" thick header to head mounting flange. We tig welded everything and then polished it to give it a clean look. The Rock Ripper" Toy Header is not only made out of the thickest material on the market, but since it is stainless it will not rust, or corrode and does not need to be ceramic coated or wrapped. The Rock Ripper" Toy Header is plug and play, and all gaskets, connectors, and pipes are included along with full color instructions.
Note: This header is not smog legal, and should be used for off road use only.
Available options:
|
TRG1860531K | 79-84 ROCK RIPPER Header | $ 448.88 kit | |
|
|
TRG1860631K | 85-95 ROCK RIPPER Header | $ 448.88 kit | |
Silicone Radiator Hose Kit
Trail-Gear Silicone Radiator Hose Kits will provide your engine with a one-of-a-kind advantage in performance and style. These kits are dual layered, combining high-grade silicone and heat-resistant embedded fibers which will provide exceptional and efficient heat reduction and increased pressure tolerance, giving you peace of mind and years of satisfaction.
Trail-Gear radiator hose kits are a direct OEM fit for either a 22R or a 22RE motor. All of our silicone hoses are 3 ply polyester reinforced construction with a temperature range from -20º to 350º. The advantage that a silicone radiator hose has over a standard rubber radiator hose is that the silicone hose can handle much greater temperatures and they are resistant to ozone exposure, oil, and other engine fluids and electrochemical degradation, which means that silicone radiator hoses last about five times longer than a standard rubber radiator hose.
Trail-Gear Silicone Radiator Hoses are high gloss, black in color, and are shipped with stainless steel hose clamps. This is one upgrade that you cannot afford to miss.
Note: Some trimming may be required from either end of each hose for proper fitment. May not work with 2" or larger body lifts.
|
|
TRG1800841K | Silicone Radiator Hose Kit - 22R | $ 84.38 KIT | |
|
|
TRG1800851K | Silicone Radiator Hose Kit - 22RE | $ 84.38 KIT | |
Air Injection Tube Blockoff Plate Kit
Trail-Gear has come up with this very clean way to totally eliminate your stock air injection tube. This kit contains all 3 plates that will allow you to install our headers without the air injection tube. No gaskets are supplied with this kit. The kit uses the gaskets that are already supplied in the header kit.
|
|
TRG1860551K | Air Injection Tube Blockoff Plate Kit | $ 22.95 KIT | |
Exhaust Manifold Stud and Nut Kit
When installing new aftermarket headers, new hardware should be used. An even clamping force is required to keep the header tight against the head in order to seal the exhaust gasket properly. The studs on your truck may be 20 to 30 years old, and we can tell you from experience that it is cheaper and easier to replace studs then it is to remove broken ones.
Kit Includes:
|
|
TRG1860621K | Exhaust Manifold Stud and Nut Kit | $ 4.22 KIT | |
Doug Thorley Headers
Thorley headers are designed to outflow your stock exhaust manifolds. These headers increase gas mileage and give your engine more horsepower across the entire rpm range. The Tri-Y configuration builds the most power in the middle rpm range. To make these headers last, Thorley made them out of durable 14-gauge mild steel, with 3/8 in. thick flanges and 5/16 in. collector rings. To prevent leaks, these headers have an O-ring welded into the flange, in addition to the high-temperature gasket provided.
|
|
THY542Y | 1981-1987 20R/22R Toyota | $ 383.42 Pair | |
|
|
THY542YC | 1981-1987 20R/22R Toyota Ceramic | $ 455.91 Pair | |
|
|
THY5044 | 1988-1995 20R/22R Toyota | $ 354.42 Pair | |
|
|
THY5044C | 1988-1995 20R/22R Toyota Ceramic | $ 428.53 Pair | |
|
|
THY505C | 1988-1995 3.0L V6 Toyota Ceramic | $ 686.29 Pair | |
|
|
THY555Y | 1984.5-1995 20R/22R Toyota | $ 388.25 Pair | |
|
|
THY555YC | 1984.5-1995 20R/22R Toyota Ceramic | $ 462.36 Pair | |
|
|
THY506 | 1995-1999, 2.4L-2.7L Toyota | $ 356.03 Pair | |
|
|
THY506C | 1995-1999, 2.4L-2.7L Toyota Ceramic | $ 428.53 Pair | |
Advance Adapters
|
|
AA717054NP | Chevy V8 Small Block Header Non-Plated | $ 290.85 KIT | |
|
|
AA717054 | Chevy V8 Small Block Header Chrome | $ 337.12 KIT | |
|
|
AA717044NP | Ford V8 Small Block Header Non-Plated | $ 290.85 KIT | |
|
|
AA717044 | Ford V8 Small Block Header Chrome | $ 337.12 KIT | |
|
|
AA717056NP | GM 4.3L V6 Header Non-Plated | $ 267.08 KIT | |
|
|
AA717056 | GM 4.3L V6 Header Chrome | $ 308.41 KIT | |
Trail-Gear Canada is an authorized dealer of Trail-Gear parts in Canada. We are here to provide Trail Gear parts to Canadians. If you would like to save yourself the hassle of ordering Trail-Gear parts from the USA you will find our prices very competitive and shipping rates affordable.